Hydraulic oil filter for sandwich stacking

---

Hydraulic oil filter can be directly installed on the valve block of the system to further remove or block pollution particles generated due to external invasion or component wear during operation. Especially suitable for automatic control systems and servo systems. It can prevent high-precision control and execution components from quickly wearing out or getting stuck due to pollution, thereby reducing faults and extending the service life of the components. This filter is equipped with a pressure difference signal device. When the hydraulic oil filter element is contaminated and blocked to a pressure difference of 0.5MPa at the inlet and outlet, a switch signal is issued. At this time, the filter element should be replaced or cleaned to protect system safety.

Performance characteristics

1. The hydraulic oil filter has the characteristics of compact installation structure and small volume;

2. It has the advantages of high filtration accuracy, large oil flow capacity, small original pressure loss, and large pollution capacity;

3. Its filtering accuracy is calibrated with absolute filtering accuracy;

4. This hydraulic oil filter is used in high-pressure pipelines with strong temperature resistance and pressure resistance, and has a long service life.

Specification

Filter medium: hydraulic oil, water ethylene glycol

Material: carbon steel, stainless steel

Working pressure: 32MPA

Working temperature: -10 ℃~100 ℃

Form/Structure: Barrel type

Filtering accuracy: from 1, 3, 6, 12, 25 μ M

Filter ratio: X ≥ 100

Scope of use: hydraulic system, lubrication system